DigiProg 3 odometer programmer
DigiProg III, DigiProg 3 Full version odometer programmern 4.94 is the worldwide leader in the production and marketing of digital speedo- odometer programming and correction software. Digiprog III Programmer Full Version includes all cables and connectors. With the use of the DigiProg III, the odometer adjustment is a breeze.
2.033kr – 2.953kr
Description
DigiProg 3 Full version odometer programmer
DigiProg III, DigiProg 3 Full version odometer programmer 4.94 is the worldwide leader in the production and marketing of digital speedo- odometer programming and correction software. Programmer Full Version includes all cables and connectors. With the use of the DigiProg III, the odometer adjustment is a breeze.
Language: Deutsch, English, Espanol,French,Portuguese,Italiano,Turkey,Nederlands.
Digiprog 3 V4.94 Features:
1.Service Interval Adjustments and Settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication
Some Important Tips for Using Digiprog 3:
1. Power-On Password:1
2. Digiprog series not support AUDI A1 A3 Golf 6, if you want to do such model,you can choose Digimaster 3.
3. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
4. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
5. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely as the solvent can damage the clips.
6. As most of Cars Need to Open Dashboard and Do the Soldering, you’d better have basic knowledge about mileage correction before order
Function:
1. Digiprog3 is the leading system for setting and programming digital speedometer.
2. Digiprog 3 is the system, with modern hardware and latest software tachometer and speedometer repair adjustment for everyone in the simplest way possible.
3. You can use the Digiprog 3 for all speedometer, and engine control units, operating hours counter, keys, memory error, motorcycles, etc in vehicles up to 2013. easily programmed.
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
2. CAR/TRUCK Menu
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are in alphabetical order and models of vehicles are in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
Note: Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer.
This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.
Note: Don’t Connect to Laptop While Use It, and Don’t Update It Youself Online, Or It May Cause Blue Screen and Need to Ship Back for Repair
And :Please Don’t Disassemble Apart the Body Yourself, Or We Won’t be Responsible for Repair
Package including:
1 x One unit of Main interface
1 x OBD2 cable
3 x adapters
1 x Power adapter
1 x CD with software, instructions, drivers etc.
HERE is the car list you can do via OBD2 connector
HERE is the whole car list
Additional information
Weight | 2 kg |
---|---|
Version |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.